Means of Transport: By Sea/By Air/By Express

Production Capacity: 1100Tons/Year 

Packing: Carton,Pallet 

Delivery Date: Basically 15-17days 

Product Description

Hard Ferrite magnets (ceramic magnets), are mainly manufactured by SrO or BaO and Fe2O3. There are two production methods: Dry press and Wet press. The dry process is used for istropic and anistropic material, and the wet method applies only to the production of anistropic material. 

The elements of Ferrite magnet are ferric oxide、barium、strontium. Ferrite has higher coercive force and higher resistance to be demagnetized and oxidized than other non-rare earth permanent magnets. The biggest advantage of such magnet is their low cost. It is widely used from motors and loudspeakers to toys and craft etc. 

Ferrite magnets have good resistance to demagnetization, excellent corrosion resistance, and especially popular advantage of low cost. However, They are very hard, brittle and limited to simple size. The mould charge is vey expensive too. This class of magnets have lower energy characteristics compared to other magnetic materials. 

 

Due to their low cost, Ferrite magnets enjoy a very wide range of applications, from motors, loudspeakers, toys and crafts, etc. They are the most widely used magnetic material today.

 

If you are interested in our Ferrite magnets,please Show the following  magnets detail for us to quote you prices:

1.Magnet size and Dimension ,if special shape ,please offer Magnets drawing.

2.Magnetism grade 

3.Order Quantities

4.Delivery method

By sea or by air or by air express door to door ,also show your destination port. 

 

Our factory produce and manufacture magnets according to customer’s design on shape, dimension, grades, coatings etc.